angle of inclination
英 [ˈæŋɡl ɒv ˌɪnklɪˈneɪʃn]
美 [ˈæŋɡl əv ˌɪnklɪˈneɪʃn]
倾斜角；磁倾角
英英释义
noun
- (geometry) the angle formed by the x-axis and a given line (measured counterclockwise from the positive half of the x-axis)
双语例句
- This article will present the rational optimization of the hoisted point on a whole stand bar tower of single point hoisting, the length of the pole, and the angle of inclination to find its optimum association.
采用单纯形法优选抱杆参数，对单点吊整立杆塔的吊点位置、抱杆的长度、倾角和固定钢绳绳角进行合理的优化，从而找到了最优组合。 - An instrument used by surveyors in order to measure an angle of inclination or elevation.
用来测量倾斜角的测量员使用的装置。 - A surveying instrument consisting of a spirit level and a sighting tube; used to measure the angle of inclination of a line from the observer to the target.
由一个水平仪和一个观测管组成的测量工具；用来测量从观测者到目标的直线的倾斜角。 - Practice of using raise boring in excavation of guide hole for shaft with large angle of inclination Construction Technology of Long Curved Hoisting Transportation System in Steep Inclined Shafts
反井钻开挖大倾角斜井导孔的工程实践大倾角斜井长曲线提升机运输施工技术 - We quantitatively analyze the casing damage, present the deformation of casing with the change of relative position of stratum and study the angle of inclination of stratum, the pressure of stratum, the size of soaked area and the hydration of marl.
以地层的相对错动表示套损变形情况，研究了地层倾角、地层压力、浸水域大小和泥岩水化情况改变对套损的影响。 - The results of the analysis could play a important role in prediction of herringbone buckling and its angle of inclination on strip rolling line.
研究结果可为板带材轧制过程中倾斜浪及其倾斜角度的预测和控制提供理论依据。 - According to the degree in which the original ground surface has been denuded, the magnitude and the angle of inclination of the major principal stress can be calculated ( such as the magnitude of the intermediate principal stress).
根据原始地面遭剥蚀的程度，可以大致地估算最大主应力和中间主应力的量值和方向； - Any of numerous hand tools for boring holes. Practice of using raise boring in excavation of guide hole for shaft with large angle of inclination
钻孔工具，手钻钻孔用的手持工具反井钻开挖大倾角斜井导孔的工程实践 - It can be see from the measured data that the deviation angle of inclination is about 1 40 °, slightly exceeding the permitted value.
现场检测数据显示，该抗风柱基础施工偏差略大于允许值，连接抗风柱的垫板约有140°倾斜。 - The finite element software introduced the bit and established anisotropy of series of angle of inclination formation rock in air drilling. Investigate the mechanism of interaction between bit and formation rock and the procedure of PDC bit breaking rock.
建立了空气钻井中钻头钻进不同地层倾角地层岩石的动态过程的三维有限元仿真模型，并对PDC钻头破岩的过程以及钻头与岩石的相互作用机理进行了研究。